Version: | 1.00 |
---|---|
Copyright: | (C)2016 Avnet Silica company |
Date: | 30 july 2013 |
If you want, you can use separate USB-TTL adapter connected with 6 pin strip on Rialto board. In this case, you can have two separate serial channel, first (USBdongle) for programming and second (6 pin strip) for Serial Monitor. See Serial channel details
Rialto board is also designed as a plugin for SerizII board. Rialto “ready to run” kit is specially designed for quick use and fast evaluate network functionallity. All you have to do is plug End-Node on SerizII board, plug Coordinator on PC USB port, start HyperTerminal and enjoy!!
With Rialto board you can evaluate the performance of new NXP SENS300/01 device. The SEN300/01 integrates one high-accuracy temperature sensor, four relative humidity sensors, six light sensors, a user-writable non-volatile memory and a 10-bit analog-to-digital converter. Rialto application reads out basic data from temperature, humidity and light sensors. For more information about this sensor, see at NXP official site NXP official site
Rialto board integrates a NTAG203F, NFC Forum Type 2 Tag compliant IC with 144 bytes user memory and field detection. This device is used on SerizII labs. See at official documentation page of NXP site NTAG203F
Install.zip also include JN-SW-4041-SDK-Toolchain-v.1.1.exe and JN-SW-4065-JN516x-JenNet-IP-SDK-v857.exe to install developement suite.
We suggest you to read first the Quick Start Guide to perform a correct Firmware setup.
This guide explains how to use this application and provides an overview of on the structure of the project firmware
We also suggest you to see documentation JN516x Wireless Microcontrollers for any specific further detail.